
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 95-170 mm usable travel window, allowing you to dial back the nominal 170 mm stroke by up to 75 mm during commissioning.
This magnetic variant includes a -S magnet for direct mounting of CMSE reed or DMSE electronic solid-state sensors along the dual side sensor grooves. It features a standard carbon steel rod, a PT tapered port thread, and uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) without FB, CA, CB, or CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 95-170 mm travel window on the fly to accommodate different carton lengths on a packaging line without physically replacing the actuator.
Use the rear stopper screw to establish multiple retract end-positions for automated assembly equipment, avoiding the need to bolt on external mechanical stops.
The 75 mm adjustment range is perfect for product-size changeovers on a packaging line, letting you set variable end-stops without swapping out the whole actuator. If your machine requires the load to be held statically without live air pressure, note that the rear adjuster acts only as a travel stop and not a brake; you should specify an SAIL locking cylinder or an external pilot-operated check valve instead.
Because the 170 mm stroke is below the 300 mm threshold, side-loading risks are moderate, though the robust 25 mm carbon steel rod and M20x1.5 thread naturally tolerate higher bending moments than smaller bores. To achieve a true ISO 15552 replacement match, verify the 100 mm bore, 170 mm stroke, -75 mm adjuster, PT port, and -S magnet requirement.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the nominal 170 mm, creating a 95-170 mm usable travel window. It acts as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.