verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke175 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$200.76 $208.26Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10

By turning the external stopper screw, you can fine-tune the effective travel within a 165-175mm window, allowing precise end-position calibration at commissioning without swapping out the entire unit. This cylinder features a 25mm carbon steel piston rod and a G1/2 PT port to handle high flow rates efficiently.

The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic solid-state sensors. While the rear adjuster acts as a travel stop to set deceleration, it does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. The SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X175-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10 Is Used

precision_manufacturing

Precision End-Position Tuning

Dial in the exact 165-175mm travel window during machine commissioning to perfect product placement without external stops.

settings_input_component

Product Size Changeover

Quickly adapt automated lines to new product dimensions by adjusting the rear stopper screw on the fly.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10 the Right Cylinder?

The adjustable stroke is selected over a fixed SAI cylinder when machine setups require variable end-stops or product-size changeovers, letting you dial in the 10mm trim without adding external stops. To match an ISO 15552 replacement, verify the 175mm stroke, 10mm adjustment, G1/2 port, and desired mounting bracket.

For strokes of 300mm or more, an external guide is recommended to prevent excessive side-loading, though this 175mm stroke is well within standard limits. The 25mm rod and M20x1.5 thread provide excellent rigidity for demanding dynamic applications.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the nominal 175mm stroke by up to 10mm, creating a 165-175mm usable travel window. It sets the end position and deceleration but does not lock or hold the load without live air pressure.

At 0.7 MPa, the push force increases to 5497N, making it suitable for heavy-duty pressing and clamping.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X175-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.