
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X175-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window from 75 to 175 mm. This built-in stopper lets you dial in the exact retract position during commissioning or product changeovers without physically swapping the barrel or adding external stops. The 100 mm bore delivers substantial thrust, pushing 5497 N and pulling 3681 N at 0.7 MPa, making it well-suited for heavy-duty positioning tasks.
This model features a carbon steel piston rod with an M20x1.5 thread, providing a robust interface that handles high side loads well. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors if position feedback is later required. It supports a speed range of 30-800 mm/s and relies on variable air cushions at both ends to decelerate the load smoothly. Remember that the rear adjuster and cushions act only as travel stops; they do not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance from 75 to 175 mm on packaging lines when switching between different box or container sizes.
Fine-tune the exact end-of-stroke position during commissioning without machining new spacer blocks or replacing the entire actuator.
Choose this 100 mm bore when your application requires pushing forces around 5497 N at 0.7 MPa. The 100 mm adjustment range on this specific SKU is ideal for machines processing highly variable product sizes, offering a 75-175 mm travel window. If you need a fixed end position without any trim capability, a standard SAI cylinder is simpler.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 175 mm stroke, PT tapered port threads, and the chosen mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the 175 mm stroke is under the 300 mm threshold, side-load stress on the M20x1.5 rod is moderate, though an external guide is still recommended for heavy lateral loads. For applications requiring the load to be held in place without continuous air pressure, select a SAIL or BSAI series cylinder instead of relying on this adjuster.
Quick checklist
The rear adjuster acts as an external stopper, allowing you to shorten the 175 mm nominal stroke by up to 100 mm. This creates a usable travel window of 75 to 175 mm, which is set mechanically during commissioning and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.