
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X175-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. By incorporating a 20mm adjustment mechanism at the rear end, this model allows operators to shorten the effective travel from its nominal 175mm down to 155mm, creating a precise 155-175mm usable window for dialing in final end positions.
This fine-tuning capability is achieved via an external stopper screw rather than a locking mechanism, meaning the cylinder still requires live air to hold a load. The extruded aluminum barrel features integrated sensor grooves on both sides for straightforward detection setup. While the robust 25mm piston rod and M20x1.5 thread handle high stresses effectively, the rear adjuster only governs the retract end deceleration and travel limit without acting as a brake.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly modify the retract end-stop distance by up to 20mm when switching a packaging line to accommodate different carton lengths.
Dial in the exact 155 to 175mm travel window during initial commissioning to perfect pressing forces without machining external spacers.
The adjustable 155-175mm travel window is ideal for production lines running multiple product sizes, allowing you to fine-tune the retract position during commissioning or changeovers without physically swapping out a fixed-stroke SAI cylinder. Because the 175mm stroke is below the 300mm threshold, external side-load guides are less critical here than on longer units, though the 25mm rod still provides excellent resistance to deflection.
When matching this ISO 15552 cylinder for a direct replacement, verify the 100mm bore, 175mm nominal stroke, 20mm adjustment range, PT tapered G1/2 port thread, and carbon steel rod material. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting the FB, CA, CB, and CR styles. If your process demands true load-holding without continuous air pressure, you must look to the SAIL or BSAI series, as this adjustable stopper does not function as a rod lock.
Quick checklist
If needed, it can safely operate up to 1.0 MPa, yielding a maximum push force of approximately 801 kgf.
The rear stopper screw allows you to trim the effective stroke back from the 175mm nominal length by up to 20mm. This creates a usable travel window of 155 to 175mm, enabling fine end-position tuning without replacing the cylinder or adding external mechanical stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.