
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X175-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 145-175 mm usable travel window, allowing you to dial back the nominal 175 mm stroke by up to 30 mm during commissioning.
This extruded aluminum profile barrel omits tie-rod construction and includes sensor grooves on both sides for flexible mounting. The standard carbon steel rod and M20x1.5 rod thread handle high side loads, while the rear screw acts purely as a travel stop to fine-tune deceleration without needing external stops.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract position within the 145-175 mm window when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Dial in the exact stop point during machine commissioning using the rear adjuster, removing the need to fabricate and install external mechanical stops.
Choose this 100 mm bore unit when your application requires substantial thrust—3927 N at 0.5 MPa—and a variable end-stop. The adjustable stroke is ideal for product changeovers where the exact end-position varies by up to 30 mm, eliminating the need to physically swap a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 175 mm stroke, 30 mm adjustment, PT tapered port thread, and mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Because the rear adjuster only sets the travel end and the air cushions decelerate the load, this cylinder does not hold position without live air. For fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster acts as an external stopper that shortens the effective stroke by up to 30 mm. This provides a usable travel window of 145 to 175 mm, allowing precise end-position tuning without changing the cylinder itself.
At 0.7 MPa, the push force increases to 5497 N. The maximum operating pressure is 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.