
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X175-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 135 to 175 mm, allowing you to dial back the nominal 175 mm stroke by up to 40 mm during machine commissioning. This fine-tuning capability prevents the need to swap physical cylinders or bolt on external stops when exact end-positions must be met.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjusting screw acts purely as a travel stop to set deceleration endpoints and does not lock or hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 135 to 175 mm end-position during initial commissioning without machining custom spacers or swapping cylinders.
Quickly adjust the retract stop on packaging lines when product dimensions change, minimizing downtime between runs.
Select this 100 mm bore model when your application requires substantial thrust but demands precise end-position tuning across a 135 to 175 mm window. Choose this adjustable SAIJ over a fixed-stroke SAI when product changeovers require variable end-stops without mechanical rebuilds.
To replace an ISO 15552 cylinder, match the 100 mm bore, 175 mm stroke, PT G1/2 port, and your required mounting style from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB, CA, CB, and CR are omitted from this series). Because this unit lacks the -S magnet option, it will not support AirTAC CMSE reed or DMSE electronic sensors without modification. For load-holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa the push force increases to 5497 N.
The rear adjuster screw lets you shorten the effective travel from 175 mm down to 135 mm. This stopper sets the travel end for deceleration but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.