
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X175-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X175-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 175 mm nominal stroke that can be dialed back by up to 75 mm, yielding a highly versatile 100 to 175 mm usable travel window.
This bore size utilizes a G1/2 port and a robust 25 mm carbon steel rod with an M20x1.5 thread, providing excellent resistance to side loading. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise end-position detection.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X175-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 100 to 175 mm end-position during format changeovers on packaging lines, eliminating the need to physically swap out actuators when product dimensions change.
Fine-tune the retract stroke during initial commissioning to perfectly seat heavy components, using the rear stopper to absorb kinetic energy rather than relying solely on the air cushion.
Adapt the travel distance on assembly stations to apply precise pressing or clamping forces across different workpiece heights without altering the pneumatic pressure.
Select this 100 mm bore actuator when an application requires substantial thrust but variable end-stops, such as accommodating multiple product sizes on a single line without swapping cylinders. For higher force requirements, a 125 mm bore provides 6136 N at the same pressure.
The rear screw mechanism allows for fine end-position tuning at commissioning without adding external stops. Remember that this adjuster acts strictly as a travel stop, not a lock; the cylinder cannot hold a load without live air pressure. For load-holding applications, consider an AirTAC SAIL or BSAI model. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 100 mm bore, 175 mm stroke, 75 mm adjustment, PT tapered port thread, and the -S magnet option.
Quick checklist
If the pressure is increased to 0.7 MPa, the push force rises to 5497 N.
The rear adjuster screw allows you to shorten the effective stroke from its 175 mm nominal length by up to 75 mm. This creates a usable travel window of 100 to 175 mm, enabling you to set the exact retract end-position during installation without changing the physical cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.