
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X180-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X180-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel. With a nominal stroke of 180 mm and a 100 mm adjustment range, it provides a highly flexible usable travel window of 80 to 180 mm. This wide adjustment band is ideal for prototyping or production lines where exact end-positioning is dialed in during commissioning without swapping hardware.
It features a 25 mm carbon steel piston rod and a G1/2 port, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a travel stop to set deceleration endpoints and does not lock the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X180-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position during initial commissioning, adjusting the travel window from 80 to 180 mm on the fly without machining external stops.
Quickly adapt automated lines to new part sizes by rotating the rear adjuster screw, shifting the retract end-position to match the new component dimensions.
An adjustable stroke is preferred over a fixed SAI model when you need variable end-stops for rapid product changeover or machine setup. To match this ISO 15552 cylinder, confirm the 100 mm bore, 180 mm stroke, 100 mm adjustment, G1/2 PT port, and required mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
For any application approaching the 180 mm stroke, evaluate side-load conditions. While the 25 mm rod is robust, long unsupported strokes still require an external guide to prevent excessive wear. If your machine requires true load-holding without continuous air pressure, this cylinder is not a lock; consider the SAIL or BSAI series instead.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 80 to 180 mm, which can be fine-tuned during commissioning without changing the cylinder.
At 0.9 MPa, the push force increases to 7068 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.