
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X180-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X180-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated external screw allows you to trim the effective travel back by up to 20 mm, creating a precise 160-180 mm usable stroke window for exact end-position tuning at commissioning.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during product changeovers. The adjuster functions strictly as a travel stop to set deceleration limits, not as a load-holding brake. For applications requiring position holding without live air pressure, consider the SAIL or BSAI series instead. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X180-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 160-180 mm travel window during initial commissioning to perfectly align heavy stamping or pressing mechanisms without machining external stop blocks.
Quickly dial in the end-stop position by up to 20 mm when switching the production line to a different product size, minimizing downtime between runs.
Utilize the rear adjusting screw to compensate for mechanical wear or slight dimensional shifts in the fixture over time, maintaining exact positioning accuracy.
The 180 mm stroke with a 20 mm adjustment window is chosen over a fixed-stroke SAI cylinder when you need variable end-stops to accommodate slight mechanical variations or product size changes on a line. Ensure your setup matches the ISO 15552 mounting interface dimensions, utilizing the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts.
When configuring, note the PT tapered port threads and the standard carbon steel rod. Because the nominal stroke of 180 mm is below the 300 mm threshold, external side-load guides are less critical, but the substantial 25 mm rod diameter and M20x1.5 rod thread handle significant side loads effectively. Remember that neither the rear adjuster nor the adjustable air cushions at both ends will hold a load safely without continuous air pressure.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that lets you shorten the nominal 180 mm stroke by up to 20 mm, providing a usable travel window of 160 to 180 mm. It sets the end position and deceleration point but does not lock or hold the load without live air pressure.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.