
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X180-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X180-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 180 mm stroke that can be dialed back by up to 40 mm, creating a precise 140-180 mm usable travel window.
This model features a 25 mm carbon steel piston rod with an M20x1.5 thread, offering robust resistance to side loads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. While the rear adjuster allows you to fine-tune the end position during commissioning, it acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X180-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the end-stop distance between 140 and 180 mm during product size transitions without replacing the cylinder.
Handle heavy routing gates on production lines, relying on the M20x1.5 threaded rod for secure mechanical linkage.
Choose this 100 mm bore when your application requires substantial thrust, such as lifting or pressing 400 kg at 0.5 MPa. The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers without swapping the cylinder. For strokes of 180 mm, side-load risks are moderate, but for any travel exceeding 300 mm, an external guide is recommended to prevent rod damage.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 180 mm stroke, 40 mm adjustment range, G1/2 port, and desired mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. Since this unit lacks a magnet, position sensing requires adding a separate magnet or choosing the -S variant to use CMSE reed or DMSE electronic sensors. For load-holding without air pressure, consider the SAIL or BSAI series instead.
Quick checklist
If operated at 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 180 mm down to 140 mm. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.