
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X180-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X180-50-S is a double-acting ISO 15552 profile cylinder with an integrated rear stroke adjuster. It provides a 130 to 180 mm usable travel window, allowing you to dial back the nominal 180 mm stroke by up to 50 mm during commissioning.
This variant features a carbon steel rod and a PT tapered port. Equipped with a magnet, it supports AirTAC CMSE reed and DMSE solid-state sensors via the dual-side barrel grooves. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X180-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-180 mm travel window rapidly when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Fine-tune the retract stop during machine commissioning to perfect a heavy pressing operation without adding external mechanical stops.
Adjust the stroke limit on the fly for automated assembly equipment that processes multiple part heights on the same fixture.
If your application needs less force, stepping down to an 80 mm bore yields 2513 N. Choose this adjustable SAIJ over a fixed SAI when product changeovers require rapid end-position fine-tuning without swapping cylinders. To match this ISO 15552 footprint, specify the 100 mm bore, 180 mm stroke, 50 mm adjustment, PT port, and the -S magnet.
For any stroke of 300 mm or more, an external guide is recommended to prevent excessive side-loading on the rod. While the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, it omits FB, CA, CB, and CR. If true load-holding is required without live air, consider the SAIL or BSAI clamp-lock series instead of relying on the adjuster.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 180 mm nominal stroke by up to 50 mm, creating a 130 to 180 mm usable travel window. It functions as a travel stop for end-position tuning and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.