
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X180-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its 180mm nominal stroke can be dialed back by up to 75mm, creating a 105-180mm usable travel window for precise end-position tuning during commissioning. This adjuster acts strictly as a mechanical stop to set the retract position, not as a lock, meaning live air pressure is still required to hold the load.
Built with a carbon steel piston rod and M20x1.5 rod thread, this 100mm bore unit handles substantial side loads, though long unsupported strokes still need an external guide. It features a G1/2 port, variable air cushions at both ends, and extruded aluminum barrel sensor grooves on both sides. The mounting hardware utilizes a reduced SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), deliberately omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X180-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 105-180mm travel window during product size transitions without physically swapping cylinders or repositioning external hard stops.
Fine-tune the retract end-stop at commissioning to absorb mechanical tolerances and achieve exact positioning of heavy 3927N-class loads.
Set custom retract distances on the fly for modular assembly lines producing multiple product variants on the same fixture.
Select this 100mm bore when your application requires high thrust—stepping down to an 80mm bore drops the 0.5 MPa push force to 2513N, while moving up to 125mm yields 6136N. The 75mm adjustment range is ideal for product-size changeovers on a line, allowing you to fine-tune the end stop without swapping the entire cylinder or adding external stops. If you need true load-holding without continuous air pressure, this standard SAIJ will not suffice; consider the SAIL (air-released lock) or BSAI (clamp-lock) variants instead.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 100mm bore, 180mm stroke, 75mm adjustment, G1/2 port (PT tapered thread), and the required mounting bracket. Since no magnet is specified, this base model does not support position sensing; add the -S suffix if you need to use AirTAC CMSE reed or DMSE solid-state sensors.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf of push force.
The rear adjuster screw lets you shorten the 180mm nominal stroke by up to 75mm, creating a 105-180mm usable travel window. It functions as a mechanical stop to set the retract position and requires live air to hold the load; it is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.