
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT tapered port. By integrating an external adjusting screw at the rear, this unit allows you to fine-tune the effective travel down by up to 10mm, creating a precise 175-185mm usable stroke window without changing the physical cylinder.
This fine end-position tuning is ideal for machine setup and product changeovers, eliminating the need to bolt on external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations to streamline the adjustable rear housing.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 175-185mm retract position during machine commissioning to perfect part seating without swapping out the entire actuator.
Quickly adjust the 10mm stroke window on packaging lines to accommodate slight variations in new product sizes without external stop hardware.
The adjustable stroke is chosen over a fixed SAI model when commissioning requires micro-adjustments to the retract end position. To match this ISO 15552 replacement exactly, specify the 185mm stroke, 10mm adjustment, G1/2 port, PT thread, and carbon steel rod. Because it lacks a magnet, it does not support CMSE or DMSE sensors without modification. Note that the rear adjuster acts only as a travel stop, not a lock; the SAIJ cannot hold a load without live air, so consider a SAIL or BSAI cylinder if load-holding is required.
Quick checklist
At 0.7MPa, the push force increases to 5497N.
The rear adjusting screw acts as a mechanical stopper that lets you trim the nominal 185mm stroke back by up to 10mm, providing a usable travel window of 175-185mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.