
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port thread. By turning the rear adjusting screw, you can trim the effective travel back by up to 100 mm, creating an 85-185 mm usable stroke window for precise commissioning.
This adjustable stopper allows you to fine-tune the retract end position during machine setup or product changeovers without swapping out the entire cylinder. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE or DMSE switches for position detection. Remember that the rear adjuster functions strictly as a travel stop, not a load lock; it cannot hold a load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 85-185 mm stroke window on the fly when switching machinery to accommodate different product lengths without changing the cylinder.
Fine-tune the retract stop during initial commissioning to achieve precise end-of-stroke positioning without machining external hard stops.
The wide 85-185 mm adjustable travel window makes this SKU ideal for prototyping or production lines handling varying product sizes, replacing the need for multiple fixed-stroke SAI cylinders.
For an exact ISO 15552 replacement, match the 100 mm bore, 185 mm nominal stroke, 100 mm adjustment code, PT port thread, and standard carbon steel rod. Because this is a non-magnet model, add an -S suffix if you require electronic or reed sensor tracking. Note that the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the nominal 185 mm stroke by up to 100 mm. This creates an adjustable travel window of 85-185 mm, allowing you to set the exact retract position without replacing the cylinder.
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.