verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke185 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$206.80 $214.30Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40

The AirTAC SAIJ100X185-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the effective travel, creating a 145-185mm usable stroke window for precise end-position calibration during commissioning.

This model features variable air cushions at both ends to manage kinetic energy, but the adjuster acts strictly as a travel stop, not a load-holding lock. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed and DMSE electronic switches if a magnet is added later. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X185-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40 Is Used

settings_input_component

Machine Changeover

Dial in the 145-185mm travel window during product size transitions without physically swapping the cylinder or adding external stopper blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end-position at commissioning to compensate for mechanical tolerance stack-ups in your fixture layout.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40 the Right Cylinder?

If your application requires less force, stepping down to an 80mm bore yields 2513N at 0.5MPa; if you need more, a 125mm bore provides 6136N. The rear adjuster is ideal for product changeovers on a line, allowing you to dial in the 145-185mm travel window instantly rather than installing external stops.

Because the 185mm stroke exceeds 150mm, ensure proper external guiding to prevent side-loading damage to the M20x1.5 rod thread. To match this ISO 15552 dimensionally interchangeable cylinder, specify the 100mm bore, 185mm stroke, 40mm adjustment, PT tapered G1/2 port, and your required mounting bracket. Remember that a plain SAIJ will not hold a load without live air pressure; for true pneumatic locking, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40 FAQ

At 0.7MPa, the push force increases to 5497N.

The rear adjuster screw acts as a mechanical stop that lets you shorten the 185mm nominal stroke by up to 40mm, resulting in a usable travel window of 145-185mm. It sets the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X185-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.