verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke185 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$212.39 $219.89Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S

The AirTAC SAIJ100X185-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 145 to 185 mm, allowing you to dial back the nominal stroke by up to 40 mm during commissioning without adding external stops.

This adjustable design is ideal for product changeovers where exact end-position tuning is critical. The -S variant includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic solid-state switches mounted in the dual-side sensor grooves. The extruded aluminum barrel maintains a standard ISO 15552 mounting footprint while omitting the FB, CA, CB, and CR bracket options.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S Is Used

precision_manufacturing

Machine Setup & Changeover

Dial in the exact 145 to 185 mm end-position during product size changeovers without replacing the cylinder or bolting on external stops.

settings_input_component

Variable End-Stop Tuning

Use the 40 mm rear adjustment screw to fine-tune the retract stroke on the fly, perfect for prototyping and optimizing motion sequences.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S the Right Cylinder?

Select this 100 mm bore when an application requires heavy thrust—up to 3927 N at 0.5 MPa or 7068 N at 0.9 MPa—combined with variable end-stop positioning. If your force requirements are lower, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. Choose the SAIJ adjustable-stroke format over a fixed SAI cylinder when you need fine end-position tuning at machine setup without swapping the physical cylinder.

For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop, not a lock; you would need an external rod lock or a SAIL/BSAI cylinder. This SAIJ100X185-40-S configuration features PT tapered ports, a carbon steel rod, and the -S magnet option. Because the 185 mm stroke is under 300 mm, side-load concerns are minimal, though long unsupported loads still need an external guide.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S FAQ

At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.

The rear adjuster screw lets you shorten the effective travel from the 185 mm nominal stroke down to 145 mm, giving a 145-185 mm usable window. The adjuster acts as a travel stop and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X185-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.