
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X185-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 185 mm stroke with a 50 mm adjustment range, creating a usable travel window of 135 to 185 mm for precise end-position tuning at commissioning.
The rear adjuster acts strictly as a mechanical stop to set the retract distance and relies on the integrated air cushions for end-of-stroke deceleration. It does not hold the load without continuous air pressure. For position sensing, the extruded aluminum barrel includes sensor grooves on both sides, ready to accept standard rails if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 135 and 185 mm during product size changeovers without installing external mechanical stops.
Fine-tune the final end position on assembly lines where multiple part variants require slightly different retraction depths.
Choose this 100 mm bore when an application requires substantial thrust, such as 3927 N at 0.5 MPa or 5497 N at 0.7 MPa, but needs on-the-fly end-position adjustments without swapping cylinders. If your process requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas heavier loads necessitate a 125 mm bore providing 6133 N. The adjustable rear screw is ideal for product changeovers where the exact retract distance varies by up to 50 mm.
This SAIJ configuration features a carbon steel rod, PT tapered port threads, and no magnet. It is dimensionally interchangeable per ISO 15552 and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster is a travel stop, not a locking mechanism; for true load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster allows you to trim the effective travel back by up to 50 mm from the 185 mm nominal stroke, providing a usable range of 135 to 185 mm. The adjuster is a mechanical stop, not a lock, and the cylinder requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.