
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 10 mm. This yields a precise 180-190 mm usable travel window, enabling fine end-position tuning at commissioning without swapping the cylinder or bolting on external stops. It features a carbon steel piston rod and PT tapered port threads.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches (requires the -S magnet option). The rear adjuster acts purely as a travel stop to work alongside the variable air cushions at both ends; it does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 180-190 mm travel window during product-size changeovers to set new end positions without replacing the cylinder.
Fine-tune the exact bottoming position of a 3927 N press operation at commissioning by trimming up to 10 mm off the stroke.
Set precise retract positions on automated machinery where the rear stopper adjusts the end point without adding external mechanical stops.
Choose this 100 mm bore when an application demands high thrust—such as 3927 N at 0.5 MPa—combined with a need to dial in the exact end-of-stroke position. The adjustable stroke is ideal for machine setups requiring variable end stops or product-size changeovers, offering flexibility that a fixed-stroke SAI cylinder cannot match.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 190 mm nominal stroke, 10 mm adjustment range, PT port threads, and the required mounting style. SAIJ supports a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting the FB, CA, CB, and CR styles. Because the 190 mm stroke is relatively short, side-loading is less severe than with long strokes, but the 25 mm rod and M20x1.5 rod thread still require external guiding if the load is heavy or offset. For load-holding without live air, select SAIL or BSAI instead of relying on the adjuster.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw acts as a stopper that lets you shorten the 190 mm nominal stroke by up to 10 mm, creating a 180-190 mm usable travel window. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.