
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end-of-travel position. With a 190mm nominal stroke and a 100mm adjustment range, it provides a wide usable travel window of 90-190mm. This enables precise end-position tuning at commissioning or during product changeover without swapping the hardware.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, though this specific SKU omits the magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR. The rear adjuster acts purely as a mechanical stop to set deceleration and travel limits; it is not a locking device and cannot hold loads without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-190mm travel window during packaging line format changes to accommodate different carton sizes without changing the cylinder.
Fine-tune the retract end position during machine commissioning to achieve exact pressing or clamping depth without adding external stops.
Handle multiple indexing positions on an assembly line by adjusting the rear screw to set the exact travel distance for each new batch run.
The 100mm adjustment range is ideal for machines processing varying product sizes. Because the 190mm stroke is under 300mm, side-load concerns are minimal, but the 25mm rod still handles standard loads well.
When replacing an ISO 15552 cylinder, match the 100mm bore, 190mm nominal stroke, 100mm adjustment window, and G1/2 port. Note that the PT tapered port thread and carbon steel rod are standard. For applications requiring position holding without live air pressure, this cylinder is insufficient; consider the SAIL air-released lock, BSAI clamp-lock, or an external rod lock instead of relying on the rear stopper.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjusting screw acts as a mechanical stop that lets you trim the 190mm nominal stroke back by up to 100mm, creating a usable travel window of 90-190mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.