
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The carbon steel piston rod and M20x1.5 rod thread provide robust resistance to side loads, while the extruded aluminum barrel houses sensor grooves on both sides.
Fitted with a -S magnet, this unit is fully compatible with AirTAC CMSE reed and DMSE solid-state sensors for precise position detection. The integrated variable air cushions at both ends manage deceleration, but the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-190 mm travel window during product size changeovers to set new retract end-stops without replacing the cylinder or adding external stopper blocks.
Leverage the built-in -S magnet with AirTAC CMSE and DMSE switches to confirm end-of-stroke positions while fine-tuning the rear adjuster at commissioning.
Selecting this 100 mm bore model is ideal when your application demands high force (up to 801 kgf at 1.0 MPa) alongside flexible end-stop positioning. The primary advantage of the SAIJ adjustable-stroke design over a fixed SAI cylinder is the ability to fine-tune the retract position on the fly, accommodating product size changeovers without swapping hardware or adding external stops.
When matching this cylinder for an ISO 15552 replacement, verify the 190 mm stroke, 100 mm adjustment range, PT tapered port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR. Because the stroke is under 300 mm, side-load concerns are moderate, but the 25 mm rod diameter still necessitates external guidance for heavy lateral loads.
Quick checklist
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 100 mm. This transforms the 190 mm nominal stroke into a 90-190 mm adjustable travel window, allowing you to fine-tune the retract end-position without changing the cylinder.
At its maximum operating pressure of 1.0 MPa, it can generate up to 801 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.