
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear adjusting screw, you can shorten the effective travel, creating a 170-190mm usable window from the 190mm nominal stroke. This allows fine end-position tuning at commissioning without swapping the cylinder or adding external stops.
The adjuster acts purely as a travel stop and works alongside the variable air cushions at both ends to decelerate the load, but it cannot hold a position without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. This SAIJ model supports the standard SAI mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE or DMSE switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 170-190mm travel window during commissioning to perfectly strike a workpiece without machining custom spacers.
Quickly shorten the retract stop by up to 20mm on packaging lines when switching to a smaller product size.
Use the rear screw to fine-tune the final position on automated assembly stations that require slight mechanical adjustments.
An adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, whereas a fixed SAI cylinder is better for static, repeatable cycles. Since this is a 190mm stroke, side-load is less critical, but long unsupported strokes still need an external guide. For ISO 15552 replacement, match the 100mm bore, 190mm stroke, 20mm adjustment, PT port, and the required mounting.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back by up to 20mm, providing a usable 170-190mm stroke window. It sets the travel end but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.