verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke190 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$212.39 $219.89Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S

The AirTAC SAIJ100X190-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 160 to 190 mm. The PT tapered port threads match the standard G1/2 air connection for this bore size.

Because this configuration includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The rear stopper lets you dial in the retract position without adding external stops, though it acts only as a travel limiter and does not hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S Is Used

precision_manufacturing

Product Changeover

Dial in the retract position by up to 30 mm during format changes, avoiding the need to physically swap cylinders when adjusting for different product lengths on the line.

tune

Commissioning Calibration

Fine-tune the end-of-stroke position during initial machine setup to achieve perfect alignment, using the rear screw rather than machining custom external spacers.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S the Right Cylinder?

The 30 mm adjustment window is ideal for product changeovers on a line, letting you shift the end-stop by up to 30 mm rather than swapping a fixed-stroke SAI cylinder. For setups requiring true load-holding without continuous air pressure, integrate an external pilot-operated check valve or select an AirTAC SAIL or BSAI locking cylinder.

When replacing an ISO 15552 cylinder, verify the 100 mm bore, 190 mm nominal stroke, 30 mm adjuster code, G1/2 PT port, and the -S magnet requirement. Although the 25 mm rod and M20x1.5 thread handle high side loads, any stroke approaching or exceeding 300 mm demands an external guide to prevent rod binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S FAQ

At 0.7 MPa, the push force increases to 5497 N.

The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 30 mm, creating a usable travel window of 160 to 190 mm. It only sets the travel end and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X190-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.