
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 150 to 190 mm, allowing you to dial back the nominal 190 mm stroke by up to 40 mm during commissioning. Built with a carbon steel piston rod and a robust M20x1.5 rod thread, it handles substantial side loads better than smaller bores.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It operates at speeds between 30 and 800 mm/s and features variable air cushions at both ends to manage impact energy.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-190 mm retract position during initial commissioning to align heavy fixtures without machining external stopper blocks.
Quickly adjust the stroke length on packaging lines when switching between different box sizes, using the 40 mm trim range to accommodate new product dimensions.
Use the rear stopper screw to fine-tune the end-of-stroke location for assembly presses that require precise, repeatable end-point tuning.
The 40 mm rear adjustment screw is ideal for product changeovers, letting you fine-tune the retract end position without adding external stops or swapping the cylinder for a fixed-stroke SAI model.
When matching an ISO 15552 replacement, verify the 190 mm stroke, 40 mm adjustment range, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is under 300 mm, side-load risks are moderate, but an external guide is still recommended for heavy lateral loads. The rear adjuster acts only as a travel stop; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from 190 mm down to 150 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.