
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered G1/2 port. Because of the 40mm adjustment code, this model provides a usable travel window between 150mm and 190mm, allowing precise end-position tuning without external stops.
This extruded aluminum profile barrel includes sensor grooves on both sides and ships with a magnet (-S) for CMSE reed and DMSE solid-state switches. The rear adjuster acts purely as a travel stop for deceleration and does not hold the load without live air pressure. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 150-190mm window during initial commissioning to perfect machine timing.
Quickly shorten the effective stroke by up to 40mm to accommodate different product lengths on the same line.
Use the rear stopper to set precise deceleration points for heavy 100mm bore automation movements.
Choose this adjustable-stroke SAIJ model over a fixed SAI when you need to fine-tune the retract end-position during commissioning or product changeovers.
When matching this for an ISO 15552 replacement, verify the 190mm stroke, 40mm adjuster, PT port thread, and -S magnet. The 25mm rod and M20x1.5 thread handle high side loads, but any stroke of 300mm or more requires an external guide. For load-holding without live pressure, use an external rod lock or consider SAIL or BSAI models.
Quick checklist
At the maximum 1.0MPa pressure, it delivers up to 801kgf.
The rear adjusting screw allows you to trim the nominal 190mm stroke back by up to 40mm, creating a usable travel window of 150-190mm. The adjuster acts as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.