
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X190-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X190-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 115 to 190 mm. The integrated -S magnet enables precise position detection.
This adjustable-stroke design allows you to fine-tune the retract end position during commissioning without adding external stops or swapping the cylinder. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X190-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-190 mm travel window during format changes on packaging lines, avoiding the need to physically swap cylinders for different package sizes.
Fine-tune the retract stop during machine commissioning to achieve exact positioning without installing external mechanical stoppers.
The 75 mm adjustment range is ideal for machines handling frequent product-size changeovers, allowing the end-stop to be dialed in on the fly rather than reverting to a fixed-stroke SAI cylinder. For position detection, the -S magnet pairs directly with AirTAC CMSE reed and DMSE electronic solid-state sensors.
Because the nominal stroke is 190 mm, side-load risks are moderate, but always ensure external guiding for optimal rod life. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for true pneumatic locking, consider the SAIL or BSAI series. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 190 mm nominal length, creating a usable travel window of 115 to 190 mm. It functions as a hard stop for end-position tuning and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.