verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X195-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 195mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke195 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$206.80 $214.30Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50

The AirTAC SAIJ100X195-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 100mm bore and a 195mm nominal stroke, but the external adjusting screw allows you to dial back the effective travel by up to 50mm. This creates a precise 145-195mm usable travel window, enabling fine end-position tuning at commissioning without swapping the cylinder or adding external stops.

Delivering substantial thrust, this carbon-steel rod model pushes 5497N at 0.7MPa and 7068N at 0.9MPa. The unit integrates variable air cushions at both ends to absorb impact, and the extruded aluminum barrel includes sensor grooves on both sides. It is dimensionally interchangeable per ISO 15552 and uses a PT tapered G1/2 port.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X195-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke195 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×195Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50 Is Used

precision_manufacturing

Product Changeover

Dial the rear screw up to 50mm to quickly switch end-stop positions for different product lengths on a single production line without changing hardware.

settings_input_component

End-Position Tuning

Fine-tune the 145-195mm travel window during machine commissioning to achieve exact final positioning without adding external mechanical stops.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50 the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, whereas a fixed SAI cylinder suits fixed-repeat tasks. Note that the rear adjuster acts as a travel stop and deceleration setter, not a lock; the SAIJ does not hold loads without live air. For positive load-holding, consider the SAIL or BSAI series.

When configuring an ISO 15552 replacement, match the 100mm bore, 195mm stroke, 50mm adjustment range, PT G1/2 port, and the required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the 195mm stroke approaches the mid-range of this bore size, ensure your mounting arrangement supports the rod adequately to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50 FAQ

The pull force at 0.7MPa is 3681N.

The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke from its 195mm nominal length by up to 50mm, providing a usable travel window of 145-195mm. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X195-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X195-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.