
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X20-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 20mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X20-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, designed to deliver high thrust in compact, short-stroke applications. The integrated adjustment mechanism provides a 0-20mm usable travel window, allowing you to dial back the nominal 20mm stroke exactly to your fixture requirements without external stops.
Because the rear screw acts purely as a travel stop and not a lock, the cylinder relies on live air to maintain position while the variable air cushions absorb end-of-stroke kinetic energy. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if you add a magnet later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR to fit specific profile-space constraints.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X20-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
The 0-20mm adjustable travel window allows operators to quickly reset end-stops for varying product thicknesses on a packaging or assembly line without swapping hardware.
Provides robust holding force for heavy workpiece clamping, using the rear stopper to precisely limit clamp travel and prevent crushing delicate components.
The adjustable 0-20mm travel window is ideal for product-size changeovers on a line, letting operators fine-tune the end position at commissioning rather than machining custom spacers. For load-holding without continuous air pressure, this standard cylinder is insufficient; you should explore the SAIL pneumatic lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 20mm stroke, 20mm adjustment range, G1/2 PT port thread, and your required mounting bracket. Since the stroke is only 20mm, side-loading risks are lower than on long-stroke units, but you should still ensure the 25mm rod is aligned correctly to prevent premature seal wear.
Quick checklist
At 0.9MPa, the push force increases to 7068N.
The rear adjuster screw allows you to trim the effective travel within a 0-20mm window. It acts as a mechanical stop to set the exact end position during commissioning, but it does not lock the load mechanically if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.