
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X20-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 20mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X20-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. Because the nominal stroke is 20mm and the adjustment range is 20mm, you can dial the effective travel back to a zero end-stop without swapping the unit.
This model includes a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors mounted in the dual-side extruded aluminum barrel grooves. The rear screw acts as a travel stop for commissioning fine-tune needs, but it does not lock the load without live air. For load-holding without pressure, consider a SAIL or BSAI variant.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X20-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides high clamping force with a 0-20mm adjustable travel window, allowing operators to dial in the exact end position for delicate parts.
Enables rapid product-size changes on a line by turning the rear stopper to modify the effective stroke without replacing the entire cylinder.
Ideal for commissioning automated equipment where the rear screw fine-tunes the retract end position to sync with downstream conveyors or tooling.
Select this 100mm bore cylinder when an application requires high thrust (up to 3927N at 0.5 MPa) but only a very short, finely tuned travel window. Choose this adjustable-stroke SAIJ over a fixed SAI when you need to trim the end position by up to 20mm during machine setup or product changeover rather than adding external stops.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting dimensions. To replace a cylinder, verify the 100mm bore, 20mm stroke, 20mm adjustment, PT port, and the -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 20mm. Since the nominal stroke is 20mm, the usable travel window is 0-20mm, allowing precise end-position tuning at commissioning.
At 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.