
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 190-200 mm usable travel window, letting you trim the retract end-position by up to 10 mm during commissioning without adding external stops.
This unit features a carbon steel piston rod with an M20x1.5 thread, sized to handle demanding side loads. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It uses a G1/2 port and relies on a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) that omits FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 190 to 200 mm retract position during product size changes without replacing the cylinder or shimming external stops.
Fine-tune the stroke end during initial commissioning to compensate for mechanical tolerance stack-up in your tooling.
The 10 mm adjustment range is ideal for applications needing precise end-position tuning during machine setup or product changeover, rather than swapping a fixed-stroke SAI cylinder. Mounting and porting must match your ISO 15552 footprint: 100 mm bore, 200 mm stroke, 10 mm adjust, PT G1/2 thread, and no magnet.
Because the rear screw acts only as a travel stop and the air cushions handle deceleration, this cylinder cannot hold a load without live air pressure. If your application requires fail-safe load holding, use a SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock. For this 200 mm stroke, ensure external guiding if the load generates high bending moments.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
A rear stopper screw lets you shorten the 200 mm nominal stroke by up to 10 mm, creating a 190-200 mm usable travel window. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.