
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the 200 mm nominal travel by up to 100 mm. This creates a wide 100-200 mm usable window, giving you immense flexibility to fine-tune end positions during commissioning or product changeovers without swapping out the physical barrel.
It uses a G1/2 port and a robust M20x1.5 rod thread, which provides excellent resistance to side-loading forces. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the travel back from 200 mm to 150 mm in minutes when a production line switches to a smaller product size, eliminating the need to physically swap cylinders or add external stopper blocks.
Perfect the final end-of-stroke position during machine setup, ensuring precise mechanical alignment without disassembling the actuator or re-engineering the mounting footprint.
Create a flexible testing fixture where the retract position can be shifted by up to 100 mm, allowing a single station to validate parts of varying dimensions.
The SAIJ100X200-100 is specifically selected over a fixed SAI cylinder when a variable end-stop is needed for machine setup, allowing a 100 mm adjustment range to accommodate multiple product sizes on one line.
When ordering, match the exact configuration: 100 mm bore, 200 mm stroke, 100 mm adjustment, PT tapered port thread, carbon steel rod, and no magnet. Note that the rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series instead. For any stroke of 300 mm or more, an external guide is recommended to prevent rod binding, though this 200 mm stroke is well within safe limits.
Quick checklist
At the maximum operating pressure of 1.0 MPa, the push force reaches 801 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 200 mm nominal stroke by up to 100 mm, providing a usable travel window of 100 to 200 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.