verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke200 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$212.39 $219.89Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S

The AirTAC SAIJ100X200-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a built-in magnet for position sensing. With a nominal 200 mm stroke and a 100 mm adjustment range, it provides a highly flexible 100-200 mm usable travel window for precise end-position tuning.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear screw acts purely as a travel stop for deceleration and positioning, meaning it will not hold a load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S Is Used

settings_input_component

Product Size Changeovers

Dial in the 100-200 mm travel window on the fly to accommodate different product lengths on a packaging line without changing out tooling.

factory

Variable End-Stop Positioning

Use the rear adjuster to set multiple precise end-stops for automated assembly equipment, ensuring perfect alignment without external mechanical stops.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S the Right Cylinder?

Choose this adjustable model when your application requires frequent product changeovers or commissioning fine-tuning without swapping the entire cylinder or adding external stops. If you need less force, stepping down to a bore 80 cylinder yields 2513 N at 0.5 MPa; stepping up to bore 125 provides 6136 N. For load-holding without continuous air pressure, an external rod lock or pilot-operated check valve is required, as the adjuster is not a brake.

When replacing an ISO 15552 cylinder, match the 100 mm bore, 200 mm nominal stroke, PT tapered port threads, and the -S magnet option. The SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the 200 mm stroke is under the 300 mm threshold, side-load concerns are minimal, but ensure the M20x1.5 rod thread is securely coupled to your load.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 100-200 mm, letting you set the exact retract end-position without altering the cylinder mounting.

At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X200-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.