verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke200 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$212.39 $219.89Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S

The AirTAC SAIJ100X200-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 200 mm stroke that can be dialed back by up to 20 mm, giving you a precise 180-200 mm usable travel window for exact end-position tuning at commissioning.

This variant includes a magnet for CMSE reed and DMSE electronic sensors, which mount cleanly into the dual-side extruded aluminum barrel grooves. The rear adjuster acts purely as a mechanical stop to set the retract position without adding external stops, but it does not lock the load without live air pressure. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S Is Used

tune

Machine Setup Fine-Tuning

Dial in the exact 180-200 mm retract position during commissioning without swapping hardware or adding external stopper blocks.

conveyor_belt

Product Changeover

Quickly adjust the end-stop to accommodate varying product sizes on a packaging line, minimizing downtime between runs.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S the Right Cylinder?

Choose this 100 mm bore when your application requires high force, stepping up from a 63 mm bore that provides 2805N at 0.5 MPa. The adjustable stroke is ideal for product changeovers, letting you fine-tune the 180-200 mm travel window on the fly instead of swapping cylinders. For load-holding without live air, this cylinder's adjuster is only a stop, so you should look to the SAIL or BSAI series instead.

When replacing an ISO 15552 cylinder, match the 100 mm bore, 200 mm nominal stroke, 20 mm adjustment range, G1/2 port, and the -S magnet requirement. The 25 mm rod and M20x1.5 thread handle substantial side loads, but for this 200 mm stroke, always ensure proper external guiding if the load is heavy or off-center.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S FAQ

The rear adjuster screw allows you to shorten the effective travel from the nominal 200 mm down to 180 mm. This stopper sets the end position mechanically but does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X200-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.