
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 170-200 mm usable travel window, allowing you to dial back the nominal 200 mm stroke by up to 30 mm during commissioning.
The unit features a 25 mm carbon steel rod with an M20x1.5 thread, paired with 36 mm variable air cushions at both ends to manage impact energy. It uses a G1/2 port and operates at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, though a magnet is not specified for this configuration.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 170-200 mm travel window during product size changes to set new end positions without physically remounting the cylinder.
Trim the retract position by up to 30 mm to accommodate varying package sizes on a sorting line without adding external mechanical stops.
The 30 mm adjustment range is ideal for product changeovers where the end-of-stroke position needs frequent fine-tuning without adding external stops or swapping out the entire cylinder.
Because the stroke is 200 mm, ensure adequate guidance for any side loads, as long unsupported strokes demand external guides. This SAIJ model supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw lets you shorten the effective travel from the 200 mm nominal stroke down to 170 mm. This stopper only sets the end position; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.