
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated magnet supports position sensing via AirTAC CMSE reed and DMSE electronic switches.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch mounting. It uses a PT tapered port thread and a 25 mm carbon steel piston rod with an M20x1.5 thread. The rear adjustment screw functions strictly as a mechanical stop to set the retraction end position and does not lock or hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 170-200 mm retraction end-position during initial commissioning to align heavy press fixtures without machining external stop blocks.
Quickly adjust the stroke length by up to 30 mm on a packaging line when switching to a different product size, minimizing downtime.
Act as a movable diverter on a material handling conveyor, allowing the retraction point to be fine-tuned on the fly to accommodate varying package dimensions.
Choose the SAIJ adjustable-stroke variant over a fixed SAI model when you need variable end-stops for product changeovers or fine-tuning at setup without adding external physical stops. To match this exact ISO 15552 replacement, verify the 100 mm bore, 200 mm stroke, 30 mm adjustment range, PT G1/2 port, and the -S magnet option.
Because the 200 mm stroke is below the 300 mm threshold, side-load stress is moderate, but the substantial 25 mm rod diameter helps handle minor eccentric loads. For applications requiring true load-holding without continuous air pressure, consider the AirTAC SAIL or BSAI series instead of relying on the rear adjuster.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 200 mm down to 170 mm. It sets the travel end but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.