
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 160-200 mm usable travel window by allowing you to trim up to 40 mm off the 200 mm nominal stroke.
Unlike a fixed-stroke SAI cylinder, this model features an external adjusting screw at the rear that acts as a mechanical stop to fine-tune the end position during commissioning. The adjuster and the variable air cushions at both ends decelerate the travel but do not hold the load without live air pressure. For load-holding without continuous air, an external rod lock or a SAIL pneumatic lock cylinder is required. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod with its M20x1.5 thread handles high side-load stress well.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-200 mm travel window during product size transitions without swapping out the entire cylinder assembly.
Adjust the rear stopper on the fly to accommodate different package sizes or diverter positions on a packaging line.
The adjustable 160-200 mm travel window is ideal for product-size changeovers, eliminating the need to swap cylinders or bolt on external stops. Since this is a 200 mm stroke, the 25 mm rod diameter provides substantial rigidity, but an external guide is still recommended for heavy offset loads.
When replacing an ISO 15552 cylinder, verify the 100 mm bore, 200 mm nominal stroke, 40 mm adjustment range, PT tapered G1/2 port, and the required mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR brackets. It uses a standard carbon steel rod and does not include a magnet for sensors.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 40 mm. This creates a 160-200 mm usable travel window, allowing you to fine-tune the end position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.