
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling precise end-position tuning without external stops. It features a carbon steel piston rod and a PT tapered port thread. By integrating a magnet for position sensing, it works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves.
This specific SKU provides a 200mm nominal stroke that can be dialed back by up to 40mm, creating a flexible 160-200mm usable travel window. The rear adjuster acts solely as a travel stop to decelerate the load, meaning it will not hold the load in place without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-200mm end-stop during assembly to perfect pressing force without swapping physical cylinders on the line.
Quickly adjust the retract distance to accommodate new product sizes, reducing setup time and eliminating external stop hardware.
The adjustable stroke is chosen over a fixed SAI cylinder when you need to fine-tune the retract end-position during machine commissioning or product changeover. To match this ISO 15552 interchangeable cylinder, specify a 100mm bore, 200mm stroke, 40mm adjustment, PT ports, and a magnet for CMSE/DMSE sensors. Since the 200mm stroke is below the 300mm threshold, side-load stress is minimal, but an external guide is still recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke. For this model, you can trim the 200mm nominal stroke back by up to 40mm, resulting in a usable travel window of 160-200mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.