
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X200-50 is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical stopper, enabling you to dial back the nominal 200 mm stroke by up to 50 mm. This yields a usable travel window of 150 to 200 mm, allowing precise end-position tuning during commissioning without physically swapping the unit. Built with a carbon steel piston rod and standard PT tapered ports, it delivers robust force, pushing 5497 N at 0.7 MPa.
This bore features a 25 mm rod with an M20x1.5 thread, offering substantial surface area for side-load resistance, though any stroke of 300 mm or more still requires an external guide. The extruded aluminum barrel incorporates sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR variants found elsewhere.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 150-200 mm travel window during product changeovers without bolting on external stops or replacing the entire cylinder.
Dial in the exact retract position on the fly for multi-format production lines, using the 50 mm adjustment range to accommodate different part sizes.
The adjustable 150-200 mm travel window is ideal for product changeovers on a line where the exact end position varies slightly per run, replacing the need to stock multiple fixed-stroke SAI cylinders.
When matching an ISO 15552 replacement, verify the 100 mm bore, 200 mm nominal stroke, 50 mm adjustment range, PT port thread, and the specific mounting accessory. Because this is a standard non-magnet model, position sensing requires adding the -S option for CMSE or DMSE sensors. Remember that the rear adjuster acts only as a travel stop; it cannot hold a load without live air, so for fail-safe load holding, consider an external rod lock or the SAIL/BSAI series.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that shortens the effective travel. For this model, you can trim the 200 mm nominal stroke back by up to 50 mm, creating a usable travel window of 150 to 200 mm to fine-tune the end position.
The maximum push force reaches 7068 N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.