
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating an external stopper at the rear cap, this unit allows you to fine-tune the effective travel down from its 200mm nominal length, creating a precise 125-200mm usable window. This eliminates the need to swap out the entire actuator or bolt on external stops when dialing in final end positions during machine commissioning.
Built around an extruded aluminum barrel with sensor grooves on both sides, the cylinder accepts AirTAC CMSE reed and DMSE electronic switches if a magnet is specified later. It features a 25mm carbon steel piston rod and a G1/2 port. The rear adjuster acts strictly as a travel stop to set the retraction endpoint and works alongside the standard air cushions for end-of-stroke deceleration. It does not function as a load lock, meaning the cylinder cannot hold a load in place without continuous live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 125-200mm travel window on the fly to accommodate different product lengths without changing the actuator.
Fine-tune the exact retraction end position during machine setup to perfect the mechanical timing without adding external stops.
The adjustable 125-200mm travel window is ideal for product-size changeovers on a line, providing flexibility that a fixed-stroke SAI cylinder cannot offer.
Because this model features a 200mm stroke, it does not require external guide rails for side-load support, unlike longer 300mm+ variants. When matching ISO 15552 dimensions for a replacement, verify the 100mm bore, 200mm nominal stroke, 75mm adjustment range, PT tapered port thread, and the reduced SAIJ mounting set which includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. For applications requiring true load-holding without air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to trim the 200mm nominal stroke back by up to 75mm. This creates a usable travel window of 125-200mm, letting you set the exact end position during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.