verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X200-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke200 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$212.39 $219.89Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S

The AirTAC SAIJ100X200-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in -S magnet enables precise position sensing with CMSE reed and DMSE electronic switches.

This specific SKU provides a 125-200mm usable travel window, allowing you to dial back the nominal 200mm stroke by up to 75mm during commissioning. It uses a G1/2 PT port and includes variable air cushions at both ends to manage kinetic energy without needing external stops.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S Is Used

precision_manufacturing

Product Changeovers

Dial in the exact end-stop for different package sizes on a single machine without physically replacing the actuator.

settings_input_component

Sensor-Driven Positioning

Leverage the -S magnet with DMSE solid-state sensors to confirm the adjusted retract position in automated setups.

factory

Machine Commissioning

Fine-tune the travel window during initial setup to clear mechanical obstructions or perfect a pressing distance.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S the Right Cylinder?

Choose this 100mm bore when an 80mm bore (2268N pull at 0.5MPa) lacks thrust, but a 125mm bore is physically too large. The 75mm adjustment range is ideal for product changeovers on a line, letting you fine-tune the retract end-position without swapping the cylinder. For holding loads without live air, select a SAIL or BSAI cylinder instead, as the rear adjuster here acts only as a travel stop, not a lock.

To match this ISO 15552 cylinder, confirm a 100mm bore, 200mm stroke, 75mm adjustment, G1/2 PT port, and the -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. At 200mm stroke, side-load is minimal, but long unsupported strokes still require an external guide to protect the rod seals.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S FAQ

At 0.7MPa, the push force increases to 5497N.

The nominal stroke is 200mm, but the rear adjuster allows you to trim the effective travel back by up to 75mm, resulting in a 125-200mm adjustable window.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X200-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X200-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.