verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke210 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$218.64 $226.14Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S

The AirTAC SAIJ100X210-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 110 to 210 mm, allowing precise end-position tuning without swapping hardware.

This 100mm bore actuator uses a G1/2 port and a 25mm carbon steel rod to handle demanding loads. It retains the standard extruded aluminum barrel with sensor grooves on both sides for flexible switch placement. The rear stopper acts purely as a travel limit and works alongside the adjustable air cushions at both ends to decelerate the payload smoothly.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S Is Used

settings_input_component

Variable Product Changeover

Dial the retract stroke back by up to 100mm to accommodate different packaging widths on the fly without changing the cylinder.

precision_manufacturing

Precision End-Stop Tuning

Fine-tune the final resting position during machine commissioning to achieve exact 110-210mm travel distances for critical pressing operations.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S the Right Cylinder?

The generous 100mm adjustment range is perfect for machines that process varying product sizes, letting operators dial in the exact retract distance during changeovers instead of adding external stops. For any required load-holding without live air pressure, you must integrate an external pilot-operated check valve or select a SAIL or BSAI lock cylinder, as the SAIJ adjuster is only a stop.

To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 210mm nominal stroke, 100mm adjustment code, PT tapered port threads, and the -S magnet option. Because the stroke exceeds 300mm thresholds in larger setups, always ensure adequate external guiding to prevent excessive side-loading on the 25mm rod. Supported mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S FAQ

It can reach a maximum push force of 801 kgf at 1.0 MPa.

The rear adjuster screw allows you to trim the effective stroke within a 110 to 210mm window. It acts as a mechanical stop to shorten the retract distance, but it does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X210-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.