
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X210-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 10mm fine-tuning window, allowing you to dial the effective travel down from 210mm to 200mm during commissioning without adding external stops.
This adjustable-stroke model features an extruded aluminum barrel with sensor grooves on both sides. Because it includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state electronic switches for precise end-of-stroke detection. The mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 200-210mm travel window during line changeovers to accommodate slightly different package lengths without physically swapping the cylinder.
Use the 10mm adjustment screw to fine-tune the retract end position during machine commissioning, ensuring perfect alignment before locking down settings.
Choose this 100mm bore when you need higher thrust than an 80mm cylinder (which provides 2513N at 0.5MPa) but want to avoid the bulk of a 125mm body. The 10mm rear adjuster is ideal for applications requiring exact end-position tuning during product changeovers, serving as a physical stop rather than a load-holding lock. If your process requires the cylinder to hold its position without live air pressure, consider the SAIL or BSAI locking series instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 210mm stroke, 10mm adjustment range, PT tapered port thread, and the -S magnet requirement. With a 210mm stroke, the 25mm rod handles standard side loads, but always verify that your mechanical setup supports the load to prevent rod binding.
Quick checklist
At 0.7MPa, the push force increases to 5497N.
The external rear adjuster screw acts as a mechanical stop, allowing you to shorten the 210mm nominal stroke by up to 10mm, creating a 200-210mm usable travel window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.