
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port. By turning the rear adjustment screw, you can trim the nominal 210 mm stroke back by up to 20 mm, creating a precise 190-210 mm usable travel window for exact end-position tuning.
This adjustable stopper allows you to fine-tune the retract position at commissioning or during product changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. Remember that the rear adjuster acts only as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 190-210 mm end-stop during product size changeovers without machining new hard stops or replacing the entire cylinder.
Ideal for diverter gates or sorting mechanisms where the retract position needs occasional fine-tuning to accommodate different package sizes on the line.
The 20 mm adjustment window is ideal for applications requiring variable end-stops or minor positioning tweaks during machine setup, offering flexibility that a fixed-stroke SAI cannot match. If your process requires the load to be held mechanically without continuous air pressure, you would need to integrate an external rod lock or select a different cylinder type like the SAIL or BSAI.
To replace an existing cylinder, verify the 100 mm bore, 210 mm stroke, 20 mm adjustment range, G1/2 port, and mounting style. SAIJ supports a specific subset of ISO 15552 mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the 210 mm stroke is relatively long, ensure adequate external guiding to prevent excessive side-loading on the 25 mm rod, and note the operating speed range is 30-800 mm/s.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 210 mm nominal stroke by up to 20 mm, providing a usable travel window of 190-210 mm. It sets the travel end and deceleration point but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.