
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X210-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the retract end-position during commissioning. It provides a usable travel window of 190 to 210 mm, letting you dial in the exact stroke without swapping out the cylinder or adding external stops.
This SAIJ model includes a magnet (-S) for position sensing and is fully compatible with AirTAC CMSE reed and DMSE solid-state switches mounted in the dual-side sensor grooves. The extruded aluminum barrel design omits tie-rods, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. The rear adjuster acts purely as a travel stop to set deceleration and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 190-210 mm retract end-stop during product line changeovers to accommodate varying workpiece sizes without physically replacing the actuator.
Dial in the exact end-of-stroke position during commissioning using the rear adjuster screw, eliminating the need for external mechanical stops.
The adjustable stroke is ideal for machine setups requiring variable end stops or frequent product-size changeovers, offering more flexibility than a fixed-stroke SAI cylinder. Because the total stroke is 210 mm, you should still consider external guiding for heavy loads to prevent excessive side-loading on the rod.
To replace an ISO 15552 cylinder, match the 100 mm bore, 210 mm stroke, 20 mm adjustment range, PT port thread, and the -S magnet requirement. If your machine needs to hold position mechanically without live air, this cylinder will not suffice; consider the AirTAC SAIL (air-released lock) or BSAI (clamp-lock) series instead, as the SAIJ adjuster is not a locking device.
Quick checklist
The pull force is 3681 N at 0.5 MPa and 5130 N at 0.7 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 190 to 210 mm, enabling precise end-position tuning at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.