
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel rod and a PT tapered G1/2 port. The built-in magnet enables position sensing with AirTAC CMSE reed and DMSE electronic switches.
This model provides a 170-210mm usable travel window, allowing you to dial back the 210mm nominal stroke by up to 40mm. The adjustment mechanism acts purely as a travel stop to fine-tune end positions during commissioning; it does not lock or hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 170-210mm travel window during initial commissioning to perfectly dial in the end-of-stroke position without adding external stops.
Quickly adjust the rear stopper by up to 40mm to accommodate varying product sizes on the same production line.
Choose this adjustable-stroke model when your machine setup requires variable end-stops or frequent product changeovers without physically swapping cylinders. If you need less force, stepping down to a 63mm bore yields 2182N at 0.5MPa, but the 100mm bore is necessary for heavier payloads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
To replace an ISO 15552 cylinder, match the 100mm bore, 210mm stroke, 40mm adjustment, PT G1/2 port, and the -S magnet. Because the 210mm stroke is relatively long, ensure adequate external guiding to prevent excessive side-loading on the 25mm rod, especially given the 36mm cushion length at both ends.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 40mm, providing a usable travel window of 170-210mm. It only sets the travel end and does not lock the load without continuous air pressure.
At 0.7MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.