verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke210 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$213.06 $220.56Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50

The AirTAC SAIJ100X210-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 210 mm stroke that can be dialed back by up to 50 mm, creating a precise 160-210 mm usable travel window for exact end-position tuning at commissioning.

This model features a carbon steel piston rod and a standard PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a travel stop to fine-tune deceleration and end positions without adding external stops, while the variable air cushions at both ends absorb kinetic energy.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X210-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50 Is Used

precision_manufacturing

Product Changeover

Dial in the exact end-stop for different product lengths on a single conveyor line using the 50 mm adjustment window, avoiding mechanical rebuilds.

settings_input_component

Machine Setup

Fine-tune the retract position during commissioning to perfect timing and alignment without adding bulky external stopper blocks.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50 the Right Cylinder?

Select this 100 mm bore adjustable cylinder when your application requires on-the-fly end-position changes or product-size changeovers without swapping out the entire actuator. The 50 mm adjustment window allows you to trim the 210 mm stroke down to 160 mm, providing exceptional flexibility for variable end stops.

For ISO 15552 dimensional interchangeability, match the 100 mm bore, 210 mm stroke, PT port thread, and 50 mm adjustment code. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 210 mm stroke is relatively long, ensure adequate support to prevent rod sag and side-load wear, utilizing an external guide if necessary. Remember that the rear adjuster is a stop, not a lock; this cylinder will not hold its load without live air pressure, so for fail-safe load holding, consider an external rod lock or a SAIL pneumatic lock cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50 FAQ

At 0.7 MPa, the push force increases to 5497 N.

The rear adjuster acts as a mechanical stop that shortens the effective travel. For the SAIJ100X210-50, you can trim the 210 mm nominal stroke back by up to 50 mm, giving an adjustable travel window of 160 to 210 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X210-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.