
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X210-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated rear adjusting screw allows you to trim the effective travel back by up to 75 mm, creating a usable stroke window of 135 to 210 mm without requiring external stops.
This model uses a standard carbon steel piston rod and PT tapered port threads (G1/2). It features variable air cushions at both ends to decelerate heavy loads smoothly. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE solid-state switches for end-position verification. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, intentionally omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 135-210 mm travel window on the fly to accommodate varying package sizes on a packaging line without physically swapping cylinders.
Fine-tune the final end position during setup to perfect a mechanical sequence, avoiding the need for custom machined spacers.
The 75 mm adjustment range is ideal for machinery that requires frequent product-size changeovers, allowing operators to dial in the exact end position during commissioning rather than machining custom spacers or swapping a fixed-stroke SAI cylinder. For strokes of 210 mm or longer, ensure proper external guidance to prevent excessive side-loading on the rod.
Remember that the rear adjuster functions strictly as a mechanical travel stop, not a lock. The SAIJ100X210-75 cannot hold a load in place without live air pressure. If your application requires fail-safe load holding, consider the SAIL (air-released lock) or BSAI (clamp-lock) variants instead. For an ISO 15552 replacement match, verify the 100 mm bore, 210 mm nominal stroke, 75 mm adjuster, G1/2 port, and the correct mounting bracket before ordering.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 801 kgf.
The rear adjusting screw acts as a mechanical stopper that allows you to shorten the 210 mm nominal stroke by up to 75 mm, providing an effective travel window of 135 to 210 mm. Note that this adjuster only sets the end position; it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.