
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X210-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X210-75-S is a double-acting ISO 15552 profile cylinder with a 100mm bore and a 210mm nominal stroke. A rear-mounted adjusting screw allows you to dial back the travel, providing a usable stroke window of 135 to 210mm. This built-in stopper lets you fine-tune end positions at commissioning or during product changeovers without physically swapping the cylinder or adding external stops.
This variant features a carbon steel piston rod with an M20x1.5 thread, paired with PT (tapered) G1/2 ports. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet enables precise position detection with AirTAC CMSE reed or DMSE electronic solid-state switches. The rear adjuster acts strictly as a travel stop for deceleration, not a lock, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X210-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure the 135-210mm travel window when switching a packaging line to a different carton size, using the rear screw to set the new end position without changing hardware.
Fine-tune the exact retract position during commissioning to align a 5497N pressing or clamping operation, dialing in the 75mm adjustment to perfect the mechanical timing.
Accommodate multiple part lengths on a single conveyor station by adjusting the stroke stopper, relying on the DMSE electronic sensors to verify the customized end-of-travel position.
The 75mm adjustment window is particularly useful for machinery that processes varying product sizes, allowing operators to reposition the end-stop rapidly. For load-holding applications without continuous air pressure, this cylinder is insufficient; you should specify an SAIL (air-released lock) or BSAI (clamp-lock) cylinder, or integrate an external pilot-operated check valve.
When specifying an ISO 15552 replacement, match the 100mm bore, 210mm stroke, 75mm adjustment range, PT G1/2 port, and the -S magnet requirement. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 210mm stroke exceeds 300mm? No, but for any stroke of 300mm or more, you must account for rod side-loading by incorporating an external guide to prevent premature seal wear.
Quick checklist
At 0.9MPa, the push force increases to 7068N.
The rear adjuster screw acts as an external stop that shortens the 210mm nominal stroke by up to 75mm, giving an effective travel window of 135 to 210mm. It sets the deceleration end-point but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.