
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 210 to 220 mm, letting you dial in the retract end-position precisely at commissioning without adding external stops.
This model uses a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact bottom-dead-center of a pressing operation within a 210-220 mm window during initial machine setup.
Quickly adjust the retract end-stop by up to 10 mm to accommodate different package sizes on a packaging line.
Dial in the exact retraction point for an assembly fixture without physically swapping out the entire actuator.
Choose this 100 mm bore when your application requires heavy thrust, but a fine 10 mm end-position adjustment is needed for product changeovers. If you need less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. The rear adjuster acts as a travel stop, not a lock; it cannot hold the load without live air. For fail-safe load holding, select the SAIL or BSAI series instead.
This cylinder is dimensionally interchangeable per ISO 15552. To match this configuration exactly, specify a 100 mm bore, 220 mm stroke, 10 mm adjustment, PT tapered port thread, and no magnet. Because the 220 mm stroke is substantial, ensure external guides support the load to prevent rod side-loading and premature wear.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 10 mm. This provides a usable travel window of 210 to 220 mm for fine-tuning end positions.
At 0.7 MPa, the push force increases to 5497 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.