verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke220 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$218.64 $226.14Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S

The AirTAC SAIJ100X220-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 120 to 220mm, allowing precise end-position tuning without swapping hardware.

This extruded aluminum profile cylinder includes a magnet (-S) for CMSE reed and DMSE electronic sensors, fitting into the dual side grooves. It supports PT tapered port threading (G1/2) and uses the standard SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear stopper acts purely as a travel limit, meaning live air is required to hold the load.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke220 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S Is Used

tune

Variable End-Stop Positioning

Dial in the exact retract distance between 120 and 220mm during machine setup, accommodating different material lengths without adding external stopper blocks.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S the Right Cylinder?

The 100mm adjustment range is ideal for machines processing varied product sizes, replacing fixed-stroke SAI cylinders to allow rapid changeover. For any stroke at or above 300mm, an external guide is recommended to manage side load, though this 220mm unit handles moderate loads well.

To match this ISO 15552 interchangeable cylinder, specify: 100mm bore, 220mm stroke, 100mm adjust, PT port, carbon steel rod, and the -S magnet. If your process requires holding a load without continuous air pressure, select a SAIL pneumatic lock or BSAI clamp-lock instead, as the SAIJ adjuster is not a brake.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S FAQ

At 0.7MPa, the push force increases to 5497N.

The rear adjuster allows you to shorten the effective travel from the nominal 220mm down to 120mm, creating a 120-220mm usable window. This stopper limits the retract stroke but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X220-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.