
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, providing a 210-220 mm usable travel window for precise end-position tuning. A 10 mm external stopper screw allows you to dial back the stroke at commissioning without swapping the unit or adding external stops.
This adjustable variant features a standard carbon steel rod and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a travel stop to set deceleration and end limits; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 10 mm travel window during initial commissioning to perfectly align heavy pressing or clamping ends without machining custom spacers.
Quickly adjust the retract end-stop by up to 10 mm when switching a production line to a slightly shorter workpiece profile.
Dial in the exact 210 to 220 mm stroke requirement on automated assembly equipment to accommodate dimensional tolerances.
Select this 100 mm bore when an application requires substantial thrust—up to 5497 N at 0.7 MPa—but still needs micro-adjustments to the retract end position. If your force requirements are lower, stepping down to an 80 mm bore yields 3518 N at 0.7 MPa. Choose the SAIJ adjustable-stroke design over a fixed SAI cylinder when you need to fine-tune the end-stop during machine setup or product changeover.
Configuration for this SKU includes a 100 mm bore, 220 mm stroke, 10 mm adjustment, PT tapered port threads, and a magnet for sensors. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because the stroke is 220 mm, ensure proper external guiding to prevent excessive rod side-loading.
Quick checklist
The rear stopper screw allows you to shorten the effective stroke by up to 10 mm, creating a 210-220 mm usable travel window. The adjuster sets the end position but does not lock the load; live air is required to maintain position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.